sadsad x
asdasd
HEMEL

Hemel Aqua Stone - Invisible Water Sealer

Water-based clear water seal for bricks, mortar, and concrete with superb weather protection
989.90 TL
Ücretsiz Kargo Free
Shipping
Hızlı Kargo Fast
Shipping
Select Color:

CLEAR

CLEAR
Select Packaging:

5 lt
5 L. and over packaging options are available at stores
Select Quantity:
Installment Plan
Free Shipping
Fast Shipping
Returns
Installment Plan
If you are an Axess, Bonus, Maximum, or World Cardholder, you can complete your order with the advantage of 2, 3, or 6 installments without interest.
Free Shipping
Free shipping for orders above 20 EUR. For orders less than 20,00 EUR, a shipping fee of 6,00 EUR will be charged.
Fast Shipping
If you order the products that have the “Fast Shipping” logo until 12:00, they will be shipped on the same day. Shipments are not made on Saturday, Sunday, and public holidays.
Returns
If you return your purchased products in their unopened and original packaging, you can return them unconditionally within the first 14 days. This applies only to the Turkish market. International orders are non-refundable.
Campaign
  • Features
  • Payment Options
  • Comments (1)
  • FAQ
  • Document
  • Application
  • Safety Precautions
  • Videos
  • Suggestion Box
  • Information
  • General Features
    • Non-film forming
    • Reduces chalking
    • Allow the surface to breathe
    • Child safe (EN 71-3 Certified)
    • Ready to use
    • Clear, does not change the surface appearance
    • Prevents frost damage with high water repellency
    • Protects the surface from rain, dust, and efflorescence
    • Environmentally friendly
    Where to use
    • Cement, concrete, slate
    • Brick, tile, terracotta
    • Unpolished absorbent natural and unnatural stones
    • Historical restorations
    Packaging
    • 5 L.
    • 15 L.
    Exterior use only
    Zeminde Uygulanmaz
    Not to be applied on floors.
    Apply with brush, roller, or spray gun
    Stir well before use
    1 Lt covers 5-15 m2
  • Tips
    While applying, the application method and quantities specified in the Hemel Aqua Stone - Stone Impregnation, Technical Data Sheet should be followed.

    Due to the structure of the stones, their absorbency varies greatly. To calculate the correct consumption amount, you can apply Hemel Aqua Stone - Stone Impregnation, brick water sealer, concrete water sealer in a small area you have determined and calculate your total consumption amount on average by making area calculations.

    It is very important to apply Hemel Aqua Stone - An invisible water sealer over age. Due to the high repellency of Hemel Aqua Stone - Stone preserver, it is very difficult to apply the second layer after the first layer has dried. If the product remains on the surface in the 2nd layer application, it is an indication that you applied too late.



    Problem and Solutions


    Remaining of the 2nd layer on the surface without absorption



    Causes of the Problem:

    Hemel Aqua Stone - Invisible water sealer, should not be applied as overage.


    Solution:

    Hemel Aqua Stone - Stone Impregnation should be applied as 2 coats over wet as specified in the Technical Data Sheet. Age over age application statement; It means the application of the second layer after the first layer application, immediately after the product on the surface is absorbed by the stone, without allowing the product to dry.
    If the second layer is applied after the first layer has dried, the excess product remaining on the surface without being absorbed after Hemel Aqua Stone - Stone Impregnation should be removed with a clean and lint-free cloth. When an application is made in this way, the maintenance period and service time due to the incomplete application will be reduced. For this reason, care should be taken to apply wet over wet application while applying.

    The surface does not repel water even though Hemel Aqua Stone - Stone Impregnation is applied in 2 layers


    Causes of the Problem:

    Not enough Hemel Aqua Stone - Stone Impregnation has been applied
    The very high absorbency of the stone used


    Solution:

    You can increase the surface saturation and add water repellency to the surface by applying 1 more layer of Hemel Aqua Stone - Stone Impregnation to the surface.


    Frequently Asked Questions
    Can I get a shiny look after applying it?

    Hemel Aqua Stone - Stone Preserver, Clear Water Sealer, offers a natural and matte appearance without filming on the stone surface. It does not add any extra shine to the polish-like surface.

    Can it be used on tiles and ceramics?

    The surface on which Hemel Aqua Stone - Stone Impregnation, Stone Preserver, Clear Water Sealer, will be used must be absorbent. Since materials such as tiles and ceramics are glazed, they do not have absorbency. Therefore, it is not suitable for use with such materials.

    Can I apply as 3 coats for extra protection?

    If the product continues to be absorbed by the stone when you apply the 3rd layer, you can also apply it as a layer for extra protection.

    Can it be used indoors too? Hemel Aqua Stone - Stone Impregnation does not contain any harmful volatile organic compounds, heavy metals, and an irritating odor. You can also safely use it on indoor stone surfaces.

    Can I use Hemel Aqua Stone - Stone Impregnation on floors and horizontal surfaces?

    On the ground and horizontal surfaces, the stone surface wears out over time and the required amount of product is not left on the stone surface. Therefore, the expected performance from the product cannot be obtained in such uses.

    Can I use Hemel Aqua Stone - Stone Impregnation on all stones?

    It should not be used on non-absorbent, glazed stone surfaces.

    Will it have any effect if I apply it to wood?
    It will not give any water repellent properties when used on wood.

  • PDF icon.png (4 KB) Safety Data Sheet (SDS)
    PDF icon.png (4 KB) Technical Data Sheet (TDS)
    PDF icon.png (4 KB) Technical Data Sheet (TDS)

  • Coverage:

    • 1 L. covers 5-15 m² with one coat

    Surface Preparation:

    • Remove any dirt and dust from the surface.
    • If exists; clear the surface from oil, rust, mold, or moss completely.
    • Repair cracks and loose parts on the surface.
    • Do not apply the product on pre-coated surfaces
    • Allow the wet surface to dry completely before applying the product.

    Application:

    • The product is ready to use and does not require thinning
    • Stir the product thoroughly before use and check its homogeneity
    • Apply the product in 2 coats by a brush, roller, or spraying. Apply the 2nd coat before 1st coat dries (wet on wet)
    • Wait 24 hours for complete dry.
    • If it rains during the application, cover the applied surface, and keep it closed until completely dries.

    Instructions:

    • FOR EXTERIOR USE ONLY.
    • NOT SUITABLE FOR FLOORINGS
    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°Cto 25°C at a relative humidity range of 40-65%.
    • Do not apply the product under direct sunlight or rain.
    • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
    • Painting tools should be cleaned with soap and plenty of warm water after application.

  • Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • Impregnation with certain chemicals is called impregnation with various methods to protect the material from inside. Natural stone impregnation is applied for natural building materials and prolongs the life of the material.

    Where is protective stone impregnation, protective stone polish applied?

    Protective stone impregnation is a natural stone impregnation application applied for unpolished, absorbent natural stones such as cement, concrete, slate, brick, briquette, terracotta, and historical artifacts polish. It is also called natural stone surface protection during restoration.



    Natural stones can be exposed to difficult stains, especially as a result of frequent contact with water, use of incorrect materials, and impact. Natural stone is impregnated to protect the stone by preventing the formation of these stains.

    The protective stone impregnation process, with its water-repellent transparent stone impregnation material, prevents algae, salt efflorescence, calcification, and similar deterioration and staining due to external factors.

    Which stone impregnation, natural stone protector should be preferred? Which stone impregnations should you choose?

    Natural stone impregnations protect the stone on which it is applied against the sun's rays. It is very important that the impregnated stone does not lose its natural texture and color and does not turn yellow. For this reason, it is necessary to use high quality, especially water-based stone impregnation material that is transparent and does not form a film strip on the surface in the application of natural stone preservative, also known as stone impregnation.

    The protective stone impregnation applied after the facade restoration penetrates deeply into the surface and the absorbent property of the stone decreases, preventing the formation of dirt and oil stains.

    Natural stone protector Hemel Aqua Stone, water-based transparent water-repellent stone impregnation material is transparent and does not change the appearance of the surface. The stone does not form a film layer on the surface after the application of water-repellent impregnation. By penetrating the natural stone, it creates a barrier that cannot be understood when viewed and touched on the surface. Since Hemel water-repellent transparent stone impregnation does not form a film layer, it is not affected by UV rays and does not rise from the surface with foot rubbing.

    Since it has high water repellency, it prevents frost damage on the stones. It prevents dusting, the stone continues to breathe. It is an environmentally friendly stone impregnation material. It also does not contain heavy metals and lead, and is safe for human health. It is ready to use, produced as a stone impregnation that does not require thinning. Click for Hemel water-based transparent water-repellent stone impregnation material prices and detailed information!

    How to apply stone impregnation?

    The application surface must be clean, dry, and free of previously applied surface protectors. Stone impregnations can be applied with a brush, roller spray, or spray gun. Stone impregnation is applied in 1 to 4 layers, depending on the structure of the stone and the surface to be protected. Hemel Aqua Stone stone water repellent impregnation, water repellent natural stone protector is applied in 2 layers.

    Click to watch the stone impregnation application!

    Buy Hemel Aqua Stone 15 Lt Water Repellent Transparent Stone Impregnation online!
  • Features
    General Features
    • Non-film forming
    • Reduces chalking
    • Allow the surface to breathe
    • Child safe (EN 71-3 Certified)
    • Ready to use
    • Clear, does not change the surface appearance
    • Prevents frost damage with high water repellency
    • Protects the surface from rain, dust, and efflorescence
    • Environmentally friendly
    Where to use
    • Cement, concrete, slate
    • Brick, tile, terracotta
    • Unpolished absorbent natural and unnatural stones
    • Historical restorations
    Packaging
    • 5 L.
    • 15 L.
    Exterior use only
    Zeminde Uygulanmaz
    Not to be applied on floors.
    Apply with brush, roller, or spray gun
    Stir well before use
    1 Lt covers 5-15 m2
    Features
    Finish
    :
    Clear
    Type
    :
    Water-based
    Where to use
    :
    Stone / Concrete
  • Payment Options
    General Features
    • Non-film forming
    • Reduces chalking
    • Allow the surface to breathe
    • Child safe (EN 71-3 Certified)
    • Ready to use
    • Clear, does not change the surface appearance
    • Prevents frost damage with high water repellency
    • Protects the surface from rain, dust, and efflorescence
    • Environmentally friendly
    Where to use
    • Cement, concrete, slate
    • Brick, tile, terracotta
    • Unpolished absorbent natural and unnatural stones
    • Historical restorations
    Packaging
    • 5 L.
    • 15 L.
    Exterior use only
    Zeminde Uygulanmaz
    Not to be applied on floors.
    Apply with brush, roller, or spray gun
    Stir well before use
    1 Lt covers 5-15 m2
    Features
    Finish
    :
    Clear
    Type
    :
    Water-based
    Where to use
    :
    Stone / Concrete
    • Yorumlar (1)
  • FAQ
  • Document

    PDF icon.png (4 KB) Safety Data Sheet (SDS)
    PDF icon.png (4 KB) Technical Data Sheet (TDS)
    PDF icon.png (4 KB) Technical Data Sheet (TDS)
  • Application

    Coverage:

    • 1 L. covers 5-15 m² with one coat

    Surface Preparation:

    • Remove any dirt and dust from the surface.
    • If exists; clear the surface from oil, rust, mold, or moss completely.
    • Repair cracks and loose parts on the surface.
    • Do not apply the product on pre-coated surfaces
    • Allow the wet surface to dry completely before applying the product.

    Application:

    • The product is ready to use and does not require thinning
    • Stir the product thoroughly before use and check its homogeneity
    • Apply the product in 2 coats by a brush, roller, or spraying. Apply the 2nd coat before 1st coat dries (wet on wet)
    • Wait 24 hours for complete dry.
    • If it rains during the application, cover the applied surface, and keep it closed until completely dries.

    Instructions:

    • FOR EXTERIOR USE ONLY.
    • NOT SUITABLE FOR FLOORINGS
    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°Cto 25°C at a relative humidity range of 40-65%.
    • Do not apply the product under direct sunlight or rain.
    • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
    • Painting tools should be cleaned with soap and plenty of warm water after application.
  • Safety Precautions

    Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • Videos
    • Öneri Kutusu
Prepared by  T-Soft E-Commerce.