HEMEL

Hemel Deck Oil Antique Pine

Pigmented penetrating oil for long-lasting protection of wooden decks
2,024.90 TL
Ücretsiz Kargo Free
Shipping
Hızlı Kargo Fast
Shipping
Select Color:

ANTIQUE PINE

ANTIQUE PINE
Select Packaging:

2,5

15

5 L. and over packaging options are available at stores
Select Quantity:
Installment Plan
Free Shipping
Fast Shipping
Returns
Installment Plan
If you are an Axess, Bonus, Maximum, or World Cardholder, you can complete your order with the advantage of 2, 3, or 6 installments without interest.
Free Shipping
Free shipping for orders above 20 EUR. For orders less than 20,00 EUR, a shipping fee of 6,00 EUR will be charged.
Fast Shipping
If you order the products that have the “Fast Shipping” logo until 12:00, they will be shipped on the same day. Shipments are not made on Saturday, Sunday, and public holidays.
Returns
If you return your purchased products in their unopened and original packaging, you can return them unconditionally within the first 14 days. This applies only to the Turkish market. International orders are non-refundable.
Campaign
  • Features
  • Payment Options
  • Comments (0)
  • FAQ
  • Document
  • Application
  • Safety Precautions
  • Videos
  • Suggestion Box
  • Information
  • General Features
    • Beautiful natural finish
    • Non-film forming
    • Uv Resistant
    • One-coat protection
    • Water repellent
    • Reduces splintering
    • Child safe (EN 71-3 Certified)
    • Ready to use
    Where to use
    • Decks
    Packaging
    • 2,5 L. 
    • 15 L. 
    Exterior use only
    UV resistant
    Apply with brush or roller
    Stir well before use
    1 Lt-2 Katta 6-7 m2
    1 Lt covers 15-18 m2
    Does not crack or blister.


    Warning:
    The colors shown here are applied on oak and intended to approximate the final color. The color and the gloss obtained will vary according to the type, texture, and the absorbency of the wood. Film thickness and the number of coats applied will also affect the result. To see the final color, it is recommended to apply the product on the wood to be used.

  • Tips

    THERE IS A RISK OF SELF-FLAMMING IN LUBRICATED CLOTH. AFTER USE, THE CLOTHES MUST BE DISPOSED OF AFTER COMPLETELY WETTED WITH WATER.

    During the application, the application method and quantities specified in the Hemel Deck Oil Technical Data Sheet should be followed. For the best results, apply Hemel Deck Oil in 1 coat with a roller or brush, and remove the excess oil by brushing. If there is too much product left on the surface, it forms a film layer and Hemel Deck Oil dries too late. It does not provide a homogeneous appearance, retains ambient dust, and shows footprints.

    Apply in the direction of the veins in the wood to achieve a homogeneous appearance.

    It can be printed on the applied surface after 24 hours. The moisture content of the wood to be applied should be no more than 20%.

    Impregnation should be applied to protect softwoods against mold, fungi, and harmful insects.

    It is also recommended to apply 1 layer of Hemel Deck oil on the back surfaces to increase the service life of your wood decks.

     

    Frequently Asked Questions

     

    What is the difference between HEMEL Deck Oil and HEMEL Exotic Oil? According to what should I choose?

    HEMEL Exotic Oil is a seasonal oil developed especially for hardwood and heat-treated wooden deck floors such as ThermoWood. HEMEL Deck Oil should be the preferred choice when longer-term protection, especially for all wooden floors made of softwoods, up to 1-2 years of service life and durability are required.

     

    Can I use HEMEL Deck Oil product on the facade?

    HEMEL Deck Oil product can be used on the facade. If it is applied to vertical surfaces, maintenance times are longer than floors. However, paint performance should not be expected from such oil-based products.

     

    There is a previously applied paint on the Wood Deck. Can I use HEMEL Deck Oil without any action on it?

    Painted or polished surfaces should be completely cleaned with a scraper before HEMEL Deck Oil is applied. If an oil-based product has been used on the surface before, you can easily clean the surface with HEMEL Deck Restorer and make HEMEL Deck Oil ready for application without the need for sanding or scraper.

     

     

    Can I use the product in 2-3 coats?

     

    You should use Hemel Decking Oil in one coat. Otherwise, the excess product remains on the surface and creates a film layer and Hemel Deck Oil dries too late. It does not provide a homogeneous appearance, retains ambient dust, and shows footprints.

     

    Which product would you recommend for the sea pier to protect the wooden floor from seawater damage?

    We recommend that you apply HEMEL Decking Oil or HEMEL Exotic Oil depending on the wood type and preferred properties.

     

    I want to have a wooden ladder, which product would you recommend on it?

    We recommend you use HEMEL Decking Oil on your outdoor wooden stairs. If seasonal care is not a problem for you, you can apply it in HEMEL Exotic Oil. On your indoor stairs, you can use our water-based parquet varnishes or our oil-based HEMEL Wood Oil 2C product.

     

    What does natural oil mean?

    Many oils such as petroleum-derived oils (naphtha oil), polymerized oils, and natural oils are used in paints and industries. The natural oils mentioned here refer to oils derived from vegetable products such as linseed, Tung fruit, soy, and cotton.

     

    Problems and solutions

     

    Spontaneous flame of the cloths used in Hemel Deck oil application

     

    Causes Of The Problem:

    • Disposal of used cloth without wetting them.

     

    Solution:

    In cases where cloth, sponge, felt, etc. products are used when applying to oil-based products, there is a possibility that the materials used may spontaneously flare-up, especially in hot weather. To avoid this, these materials that come into contact with oil,  after use should be completely wetted with water and then disposed of.

     

    Failure to clean footprints and/or dust on the product applied floor despite mopping

     

     Causes of the Problem:

     

    • It is caused by the fact that Hemel Deck Oil is applied to the surface thickly when it is first applied or the excess oil is not removed by wiping with a cloth or brush.

     

    Solution:

    • To eliminate the problem, it is necessary to apply a complete scraper on the floor and re-apply. Hemel Deck Oil does not dry Causes of the Problem:
    • Application of more wood deck oil than required to be applied to the surface • Not removing excess wood deck oil applied to the surface by combing with a cloth or brush.
    • The moisture of the treated wood is more than 20% Solution:
    • If the excess wood deck oil applied to the surface is still not dried enough to be combed, the excess oil on the surface should be combed out with a brush.
    • If the surface is dried enough not to be combed, the surface should be scrubbed after waiting for complete drying and the application should be repeated.

     

    Creating a wavy appearance on the surface after applying Hemel Deck Oil

     

    Causes of the Problem:

    • It is caused by the application on the surface more than it should be applied, and the excess oil being applied not to be wiped off with a cloth or brush.
    • It is caused by uneven ground because the sanding is not made correctly.

     

    Solution:

    • The operations under the title of "Causes of the Problem" should be checked and the application should be repeated by removing the conditions that cause it.

     

     

  • •Coverage:

    • 1 L. covers 10-12 m² on softwoods and 15-18 m² on hardwoods

    •Surface Preparation:

    • Remove any dirt, oil, and wood dust from the surface.

    -New Wood Surfaces:

    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.

    -Old Uncoated Wood Surfaces:

    • Sand the weathered surface with sandpaper #80/120 or restore the wood surface using HEMEL Deck Restorer.

    -Coated Wood Surfaces:

    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface thoroughly with a sanding machine.
    • Thoroughly clean the generated dust.

    •Application:

    • The product is ready to use and does not require thinning.
    • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
    • Apply the product in 1 coat by a brush or roller and remove the excess oil by brush for the best result.
    • Apply in the direction of the wood grain to get a homogeneous look.
    • The treated surface may be stepped on after 24 hours.

    •Maintenance (when the same product had been used before):

    • Do not apply the product directly on pre-coated surfaces.
    • Clean the wood surface entirely from dirt and oil and perform a light sanding.
    • Thoroughly clean the generated dust.
    • Repeat the same process as described in “Application”.
    • Inspect annually and maintain as required.

    •Instructions:

    • FOR EXTERIOR USE ONLY.
    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
    • The moisture content of the wood should max 20%.
    • Do not apply the product under direct sunlight or rain.
    • To provide long-life protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying HEMEL Deck Oil.
    • The product should be stored at temperatures between 5°C to 35°C.
    • Painting tools should be cleaned with mineral spirits after the application.

  • Safety Precautions:

    • WARNING: OIL SOAKED CLOTH USED FOR THE APPLICATION CAN BE SELF-IGNITING. CLOTH SHOULD BE COMPLETELY SOAKED IN WATER AND DISPOSED OF AFTER BEING USED.
    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • The meaning of deck is the wooden floor used as outdoor parquet, floor covering. When choosing a deck, hardwoods that will be compatible with the weather conditions caused by the outdoor area should be preferred. If we list the properties of the decks, natural wood, environmentally friendly, compatible with human health, giving a pleasant appearance, adding a warm atmosphere to the environment, long life, resistance to external factors, easy to clean and maintain, and low slippery.

    What does decking oil do?

    Decking oil ensures the deck to have a thick, strong surface and also prevents getting damaged from impacts, and having a natural color of the wood. It is very important to use decking oils in the production and maintenance of all wooden floors. When natural decking oil is applied, the deck surface is protected against water and moisture, is prevented from deteriorating. Decking oil adds water repellency to wood and also creates a shield against dust, nail polish, alcohol, and many other similar substances. It prevents the surfaces from being damaged by acidic beverages or foods if acidic beverages are accidentally brought into contact with the wooden surface. Decking oil has a flexible property and prevents the wood from being affected as long as the wood is solid.

    Most importantly, it protects the wooden deck surface against sunlight.

     

     With natural oils colored with different color options, you can paint your wood as you wish while protecting your wood. We can give examples of wooden floors that we call decks such as pool sides, piers, sunbathing areas, balconies, terraces, walking tracks, playgrounds, beach/pool changing rooms, pergola/gazebo floors, yacht decks, flower pot organizers, and garden furniture. Maintenance of decks that are constantly exposed to the sun and in contact with water and protection with natural oil against sunlight extends the service life and ensures that the wood preserves its natural beauty.

    Which decking oil, deck paint should be used?

    There is a wide variety of decking oils on the market, but if you want to get an effective and safe result, you should choose deck oil that doesn’t contain heavy metals, lead-free, and complying with the EN 71-3 standard. After cleaning the unpainted/unpolished, grayed, or worn decks with HEMEL® Deck Restorer, you can color your deck floors, garden furniture exposed to sunlight, with 5 different color options of HEMEL® Deck Oil. You can get your furniture under extra protection against UV rays with HEMEL® Exotic Oil, which has 4 different color options and colored natural oil for deck care, you can also perform regional maintenance on the worn deck surface, you can think of it as a deck paint. If you are looking for deck care oil that is water-repellent, reduces splinter formation, preserves its natural beauty while coloring the wood, and does not form a film layer, Hemel products are right for you! See wonderful color scales such as antique pine color, walnut color, light oak, and get detailed information!

    How is decking oil applied?

    Colored natural decking oil can be applied to wooden floors by brush, cloth, roller, or dipping methods. There are various decking oil colours.

  • Features
    General Features
    • Beautiful natural finish
    • Non-film forming
    • Uv Resistant
    • One-coat protection
    • Water repellent
    • Reduces splintering
    • Child safe (EN 71-3 Certified)
    • Ready to use
    Where to use
    • Decks
    Packaging
    • 2,5 L. 
    • 15 L. 
    Exterior use only
    UV resistant
    Apply with brush or roller
    Stir well before use
    1 Lt-2 Katta 6-7 m2
    1 Lt covers 15-18 m2
    Does not crack or blister.


    Warning:
    The colors shown here are applied on oak and intended to approximate the final color. The color and the gloss obtained will vary according to the type, texture, and the absorbency of the wood. Film thickness and the number of coats applied will also affect the result. To see the final color, it is recommended to apply the product on the wood to be used.

    Features
    Finish
    :
    Semi-transparent
    Type
    :
    Oil-based
    Where to use
    :
    Decking
  • Payment Options
    General Features
    • Beautiful natural finish
    • Non-film forming
    • Uv Resistant
    • One-coat protection
    • Water repellent
    • Reduces splintering
    • Child safe (EN 71-3 Certified)
    • Ready to use
    Where to use
    • Decks
    Packaging
    • 2,5 L. 
    • 15 L. 
    Exterior use only
    UV resistant
    Apply with brush or roller
    Stir well before use
    1 Lt-2 Katta 6-7 m2
    1 Lt covers 15-18 m2
    Does not crack or blister.


    Warning:
    The colors shown here are applied on oak and intended to approximate the final color. The color and the gloss obtained will vary according to the type, texture, and the absorbency of the wood. Film thickness and the number of coats applied will also affect the result. To see the final color, it is recommended to apply the product on the wood to be used.

    Features
    Finish
    :
    Semi-transparent
    Type
    :
    Oil-based
    Where to use
    :
    Decking
  • Yorumlar (0)
  • FAQ
  • Document
  • Application

    •Coverage:

    • 1 L. covers 10-12 m² on softwoods and 15-18 m² on hardwoods

    •Surface Preparation:

    • Remove any dirt, oil, and wood dust from the surface.

    -New Wood Surfaces:

    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.

    -Old Uncoated Wood Surfaces:

    • Sand the weathered surface with sandpaper #80/120 or restore the wood surface using HEMEL Deck Restorer.

    -Coated Wood Surfaces:

    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface thoroughly with a sanding machine.
    • Thoroughly clean the generated dust.

    •Application:

    • The product is ready to use and does not require thinning.
    • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
    • Apply the product in 1 coat by a brush or roller and remove the excess oil by brush for the best result.
    • Apply in the direction of the wood grain to get a homogeneous look.
    • The treated surface may be stepped on after 24 hours.

    •Maintenance (when the same product had been used before):

    • Do not apply the product directly on pre-coated surfaces.
    • Clean the wood surface entirely from dirt and oil and perform a light sanding.
    • Thoroughly clean the generated dust.
    • Repeat the same process as described in “Application”.
    • Inspect annually and maintain as required.

    •Instructions:

    • FOR EXTERIOR USE ONLY.
    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
    • The moisture content of the wood should max 20%.
    • Do not apply the product under direct sunlight or rain.
    • To provide long-life protection against decay, apply HEMEL Timbercare Aqua on untreated softwoods and wait 24 hours before applying HEMEL Deck Oil.
    • The product should be stored at temperatures between 5°C to 35°C.
    • Painting tools should be cleaned with mineral spirits after the application.

  • Safety Precautions

    Safety Precautions:

    • WARNING: OIL SOAKED CLOTH USED FOR THE APPLICATION CAN BE SELF-IGNITING. CLOTH SHOULD BE COMPLETELY SOAKED IN WATER AND DISPOSED OF AFTER BEING USED.
    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • Videos
  • Öneri Kutusu
Prepared by  T-Soft E-Commerce.