HEMEL

Hemel Timbercare Aqua - Clear Wood Preserver

Water-based clear wood preserver* for brush application
192.50 TL
Ücretsiz Kargo Free
Shipping
Hızlı Kargo Fast
Shipping
Select Color:

CLEAR

CLEAR
Select Packaging:

1

5

20

5 L. and over packaging options are available at stores
Select Quantity:
Installment Plan
Free Shipping
Fast Shipping
Returns
Installment Plan
If you are an Axess, Bonus, Maximum, or World Cardholder, you can complete your order with the advantage of 2, 3, or 6 installments without interest.
Free Shipping
Free shipping for orders above 20 EUR. For orders less than 20,00 EUR, a shipping fee of 6,00 EUR will be charged.
Fast Shipping
If you order the products that have the “Fast Shipping” logo until 12:00, they will be shipped on the same day. Shipments are not made on Saturday, Sunday, and public holidays.
Returns
If you return your purchased products in their unopened and original packaging, you can return them unconditionally within the first 14 days. This applies only to the Turkish market. International orders are non-refundable.
Campaign
  • Features
  • Payment Options
  • Comments (0)
  • FAQ
  • Document
  • Application
  • Safety Precautions
  • Videos
  • Suggestion Box
  • Information
  • General Features
    • Prevents decay from fungi and insects
    • Easy application by brush
    • Clear
    • Odorless
    • Complies with European Norms
    • Environmentally friendly
    • Ready to use
    Where to use
    • For pine and similar softwoods to be painted and used above ground level
    Packaging
    • 1 L.
    • 5 L.
    • 20 L.
    Exterior/Interior use
    Apply with brush
    Stir well before use
    1 Lt covers 4-5 m2


    *For pine and similar softwoods to be painted and used above ground level.

  • Tips

     

    While applying impregnation, the application method and amounts specified in the Hemel Timbercare Technical Information Form should be followed.

    After the impregnation dries, you can sand the surface with 80/120 grit sandpaper before starting paint/varnish application.

    You can eliminate the maggot sounds coming from your wood by spraying the impregnation product into the holes made by the maggots with a syringe.

     

    Problems and Solutions

     

    The product does not dry out

    Causes of the Problem:

    • Inappropriate ambient temperature during the impregnation application.
    • Failure to comply with the relative humidity range
    • The moisture content of the impregnated wood is more than 20%.
    • Incorrect or no stacking
    • Absorbing much more impregnation than required
    • Inadequate ventilation.

     

    Solution:

    • The conditions causing the problem should be eliminated.

     

    Frequently Asked Questions

     

    Is it harmful to use HEMEL Timbercare Aqua Impregnation products indoors?

    There is no harm to health. Wood impregnated with the product must be completely dry before being installed indoors. If you are going to apply impregnation to the assembled wood, make sure that the application area is well ventilated to ensure complete drying.

    Can I protect my wood by just applying HEMEL Timbercare Aqua Impregnation?

    HEMEL Timbercare Aqua Impregnation product alone is not enough to protect your wood. HEMEL Timbercare Aqua is an impregnation material and your wood; It does not protect against mold, fungus, and infestation and does not protect against outdoor weather conditions. By applying breathable varnish, oil, or wood paints, you extend the life of your wood by protecting it against external weather conditions and sunlight (UV).

    Which wood types is HEMEL Timbercare Aqua Impregnation used for impregnation?

    Soft texture woods such as pine can be impregnated. Hardwoods such as Iroko and teak have both natural durability due to their dense texture and the product can't penetrate due to this dense texture. For this reason, hardwoods do not need to be impregnated.

    Is there any point we should pay attention to in the usage areas of HEMEL Timbercare Aqua Impregnation?

    • Hemel Timbercare Aqua Impregnation product is used only on soft texture woods above ground level that are not in contact with the soil. It is recommended to apply breathable varnish/paint or oil-based products to protect your wood against external weather conditions and sunlight after application.
    • If it is a wood to be used at ground level or in contact with the soil, it must be treated in impregnation facilities with a vacuum pressure system to extend the life of the wood. (e.g. deck, flowerpot, vineyard stake)

    Does the color of the wood change when I apply HEMEL Timbercare Aqua impregnation?

    Although impregnation is a colorless product, there may be very little color difference compared to the tree genus.

    Despite my application of HEMEL Timbercare Aqua impregnation, does the wood sound like a wolf? What should I do?

    Such problems may occur if not enough impregnation is applied to all surfaces of the wood (front, back, and head parts) during impregnation application, or if the impregnation has not already reached the area where the Wolf is located. If there is paint on the surface, it is mistreated, re-impregnated and Hemel Timbercare Aqua is injected into the Wolf holes with a syringe to get rid of this problem.

    How do I know if I'm driving a sufficient amount of product when applying HEMEL Timbercare Aqua impregnation?

    You can compare the square meter of the area you are applying for impregnation and the amount of product you are consuming with the value specified in the “consumption amount” heading. Care should also be taken to completely wet the wooden surface of the product to ensure that a sufficient amount of product is applied.

    Can I use it instead of impregnated primer?

    In HEMEL Timbercare Aqua Impregnation formulation, resin, filling, etc. Since it does not contain substances that can saturate the wood surface, it cannot be used as a primer. If primer application is desired, the primer application can be made extra after the impregnation process.

     

     

  • Coverage:

    • 1 L. covers 4-5 m² with one coat

    Surface Preparation:

    • The timber surface must be immaculate, and moisture content of the wood should be below 20%.

    Application:

    • The product is ready to use and does not require thinning/
    • Apply the product on timber by brush until it gets completely wet.
    • Wait 24 hours for complete dry before coating.

    Instructions:

    • FOR INTERIOR/EXTERIOR USE.
    • HARMFUL FOR BEES.
    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°Cto 25°C at a relative humidity range of 40-65%.
    • The moisture content of the wood should max 20%.
    • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
    • Painting tools should be cleaned with soap and plenty of warm water after application.
  • Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • What is impregnation, what is wood preservative?

    Impregnation is the process of impregnating the sapwood of wood with various chemicals using special methods. Preservatives are divided into two according to their content. Water-based and synthetic impregnation.

    Water-based preservatives are odorless and safe for health.

    Water-based preservatives protect against worms, fungi, and mold in wood for up to 15 years. Impregnation protects the wood from the inside and prevents it from rotting. While it allows it to breathe, it allows it to expel the moisture inside and extend its life.

    Soft texture woods such as pine can be impregnated. Hardwoods such as Iroko and teak have both natural durability due to their dense texture and the product can't penetrate due to this dense texture. For this reason, hardwoods do not need to be impregnated.

     

    Where is Wood Impregnation used?

    The impregnation process is applied for all kinds of construction applications, facade cladding, garden furniture, fence, patio, pergola, pier, marina, children's playgrounds, agricultural areas, and similar wood to be used. The impregnated wood is protected from the inside, and protected against rot.

     

    What are the methods of water-based impregnation?

    Wood protective impregnation is applied by brush, roller, or dipping methods generally used in the industrial field, depending on the surface width of the application area and the areas of use.

    Hemel wood preservatives are ready to use, there is no need for thinning. To get the best results, we recommend you to comply with the application methods and amounts specified in the technical data sheets of the purchased product. Impregnation is not available to be applied on painted/varnished wood, the wood must be sanded beforehand, and also it must be cleared of dirt and dust.

    Click to get information about wood impregnation applications, watch application videos!

     

    What type of water-based wood Preservative should be preferred?

    Compliance with European Norms and being safe in terms of health should be preferred. It should be taken into account that the impregnating agents must be odorless and the VOC value in their content must be low. Hemel offers impregnation materials and impregnation paint with "0" VOC value and registered in the Ministry of Health Institution Biocidal Inventory.

     

    Impregnating paint agent colors

    transparent (colorless), brown impregnation, or green impregnation water-based wood preservatives (impregnating agents) are produced by Hemel. Tanalith impregnation stands out among the water-based, odorless wood preservatives with its new generation environmentally friendly green and brown options. It is suitable for use on soft texture woods to be painted over ground level and ground level.

    After the wood impregnation is done, we recommend you to protect it from weather conditions with Hickson Decor Ultra Aqua Wood Stain which is a water-based varnish. This semi-transparent water-based varnish is a high-performance product that allows the wood to breathe, protects against UV rays, and does not contain heavy metals and lead.

     

    Water-based wood impregnating paint agents prices

    Visit us for the options and impregnation prices of all water-based impregnating agents, odorless wood preservatives, eco-friendly, in compliance with European Norms, with 0 VOC value!

  • Features
    General Features
    • Prevents decay from fungi and insects
    • Easy application by brush
    • Clear
    • Odorless
    • Complies with European Norms
    • Environmentally friendly
    • Ready to use
    Where to use
    • For pine and similar softwoods to be painted and used above ground level
    Packaging
    • 1 L.
    • 5 L.
    • 20 L.
    Exterior/Interior use
    Apply with brush
    Stir well before use
    1 Lt covers 4-5 m2


    *For pine and similar softwoods to be painted and used above ground level.

    Features
    Where to use
    :
    Wooden Door (Interior),Garden Furnitures,Balcony Railings,Roof Eaves,Cladding (Exterior),Cladding (Interior),Fence,Decking,Joinery,Hobby,Door (Exterior),Wainscot,Stairs,Shutter,Parquet (Wood Floor),Window,Pergola,Siding
    Type
    :
    Water-based
    Finish
    :
    Clear
  • Payment Options
    General Features
    • Prevents decay from fungi and insects
    • Easy application by brush
    • Clear
    • Odorless
    • Complies with European Norms
    • Environmentally friendly
    • Ready to use
    Where to use
    • For pine and similar softwoods to be painted and used above ground level
    Packaging
    • 1 L.
    • 5 L.
    • 20 L.
    Exterior/Interior use
    Apply with brush
    Stir well before use
    1 Lt covers 4-5 m2


    *For pine and similar softwoods to be painted and used above ground level.

    Features
    Where to use
    :
    Wooden Door (Interior),Garden Furnitures,Balcony Railings,Roof Eaves,Cladding (Exterior),Cladding (Interior),Fence,Decking,Joinery,Hobby,Door (Exterior),Wainscot,Stairs,Shutter,Parquet (Wood Floor),Window,Pergola,Siding
    Type
    :
    Water-based
    Finish
    :
    Clear
  • Yorumlar (0)
  • FAQ
  • Document
  • Application

    Coverage:

    • 1 L. covers 4-5 m² with one coat

    Surface Preparation:

    • The timber surface must be immaculate, and moisture content of the wood should be below 20%.

    Application:

    • The product is ready to use and does not require thinning/
    • Apply the product on timber by brush until it gets completely wet.
    • Wait 24 hours for complete dry before coating.

    Instructions:

    • FOR INTERIOR/EXTERIOR USE.
    • HARMFUL FOR BEES.
    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°Cto 25°C at a relative humidity range of 40-65%.
    • The moisture content of the wood should max 20%.
    • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
    • Painting tools should be cleaned with soap and plenty of warm water after application.
  • Safety Precautions

    Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • Videos
  • Öneri Kutusu
Prepared by  T-Soft E-Commerce.