Hickson Decor Aqua Clear Primer

Tips

Application methods and quantities specified in the Hickson Decor Aqua Clear Primer - transparent wood Primer Technical Data Sheet must be followed during application.

The application can be completed quickly with the immersion method in large-scale projects that are not assembled.

Hickson Decor Aqua Clear Primer-transparent wood primer provides ease of application by reducing the absorbency of the first coat before paint/varnish is applied to the surface in very hot weather.

It helps to reduce application-induced coat marks in varnish applications.

Problems and Solutions

Resin flowing from wood after application

Causes of the Problem

• This situation is a natural process arising from the structure of the wood. Some types of wood, such as cedar, contain dense resin.

Solution

• To improve the visuality, the parts where the resin flows can be wiped with cellulosic thinner and retouched after smooth sandpaper. • If resin flow is observed on the surface after paint/varnish application; It should be waited for a while for all the resin in the knots and resin pouches to flow and dry on the surface. Afterward, the dried resin should be removed with a spatula and the resin residue on the surface should be wiped off with cellulosic thinner. If necessary, this area can be retouched after the sanding. • The best time to clean resin is when it is cold. When this application is made in hot weather, the resin can contaminate the surface.

Hickson Decor Aqua Clear Primer - Clear Wood Primer does not dry

Causes of the Problem:

• Thinning of Hickson Decor Aqua Clear Primer - Transparent Wood Primer
• Applying too much product than necessary
• If the application is made under the conditions of the workshop, the ventilation is not sufficient (windows and doors are constantly closed, no airflow)
• Failure to comply with the temperature and relative humidity in Hickson Decor Aqua Clear Primer - Clear Wood Primer general instructions.
• The moisture content of the wood is more than 20% during the application.
• Hickson Decor Aqua Clear Primer - Applying varnish/polish on the Transparent Wood Primer before it dries.

Solution:

• Timbers whose application has been completed with Hickson Decor Aqua Clear Primer should be stacked in an area to be air-dried using stacking laths.
• Before making any application on it, make sure that it is dried.

Frequently Asked Questions

Can I apply a solvent-based product to this product?

You can use both water-based and solvent-based Hickson Decor branded products on it. The formulation of the product has been developed in a way that solvent-based Hickson Decor Ultra Wood Stain can be applied to it.

Is it necessary to sand before applying Hickson Decor Aqua Clear Primer - Clear Wood Primer?

Before starting the application, sanding should be done as specified.

Will there be a difference in the color of the wood varnish I will apply on it?

The first coat of varnish/paint you apply will be much less absorbed by the wood, as the transparent wood primer will saturate the wood cell and its surface. Accordingly, a slight shade difference can be observed compared to the applications made on raw wood.

Does it cause a color change in wood?

It is a completely transparent product, does not cause any color change on the wood.

Can it be used with the Color + Varnish system?

After the floor coloring process is completed, you can also use it to increase the saturation and performance of the wood.

Do I need to sand after applying Hickson Decor Aqua Clear Primer?

After the transparent wood primer dries, you can apply varnish directly, there is no need for sanding. If a smoother surface appearance is desired, it can be done with 180/220 sandpaper.

Can I use it with oil-based products?

Since the absorption of oil by the wood is of great importance in oil-based product applications, primer/filler application should not be applied before oil application.

Can I use it with the Color + Varnish system?

When you want to use it with the Color + Polish system, you can use it after the colorant application. In cases where it is used with colorant, make sure that the colorant applied to the floor is completely dry and sanding should not be done before / after the application.

Safety Precautions:

• USE WITH ADEQUATE VENTILATION.
• KEEP OUT OF REACH OF CHILDREN.
• Do not transfer contents to other containers for storage.
• Do not use empty plastic cans for other purposes.
• To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
• Avoid contact with eyes and skin.
• Wash hands after using.
• FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
• Dispose of contents/plastic cans in accordance with national regulations.
• Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.

What is a water-based transparent primer, what is a wood primer for?

One of the most important elements in wood care is the wood primer. Using a single coat of water-based primer before water-based varnish ensures better adhesion of the varnish to the wood and obtaining homogeneous color. Primer paint prepares the ground for varnish/paint, making the paint longer-lasting and durable.

Wood primer provides high surface saturation.

Water-based transparent primer breathes with it is a water-based feature and also gives the moisture out. This extends the life of the wood. As it’s transparent, it does not spoil the natural look of wood.

Wood primer provides ease of application in hot weather.

Where is a water-based transparent primer used?

Water-based primer is used in all exterior wood like door and window joinery, shutters, facade cladding, pergolas, balcony railings, roof eaves. (Not available for the floor)

Transparent wood primer is preferred to apply under the semi-transparent paints and colorants used to prevent the wood from losing its natural appearance, only a covering wood paint can be used after a white wood primer is applied, otherwise, a white primer will appear from the bottom and the desired transparency will not be achieved.

The wood primer is not used as a top coat because it alone does not have a wood protection property or effect.

How should surface preparation and application be done in Exterior Wood Primer?

Before applying the exterior water-based wood primer, it is necessary to clean the wood surface to be treated from all dirt, dust, and oil. To obtain a smooth surface, sand with 80/120 sandpaper and the dust formed afterward should be thoroughly cleaned. Likewise, it should be sanded again before applying it to the painted / varnished surface.

It is applied as a single coat with water-based wood primer, dipping, showering, gun, cloth, brush, or roller. It has waited for 4 to 6 hours for complete drying. After drying, solvent or water-based wood varnish, wood paint is applied.

After water-based priming, it is necessary to apply in the direction of the wood grain to obtain a homogeneous appearance.

The moisture of the wood on which water-based primer will be applied should be below 20%.

To protect pine and similar soft textured or non-impregnated woods against decay and to increase their service life, it must be impregnated before applying transparent water-based paint primer.

Which wood primer to choose?

It should be taken into consideration that the wooden primer complies with the EN 71-3 toy safety standard, and it is water-based and odorless. In addition, a ready-to-use wood primer that does not require thinning provides ease of application. Hickson Decor® Aqua Clear Primer, depending on the application to be made afterward

Hickson Decor® Aqua Universal Primer white water-based wood paint primer can be applied under transparent water-based wood primer or covering paints.