sadsad x
asdasd
PRIME

Prime Wood Colorant SA 1184 Yellow Walnut

Water-based wood dye stain
994.90 TL
Ücretsiz Kargo Free
Shipping
Hızlı Kargo Fast
Shipping
Select Color:

SA1184 Yellow Walnut

SA1184 Yellow Walnut
Select Packaging:

2,5 lt

5 L. and over packaging options are available at stores
Select Quantity:
Installment Plan
Free Shipping
Fast Shipping
Returns
Installment Plan
If you are an Axess, Bonus, Maximum, or World Cardholder, you can complete your order with the advantage of 2, 3, or 6 installments without interest.
Free Shipping
Free shipping for orders above 20 EUR. For orders less than 20,00 EUR, a shipping fee of 6,00 EUR will be charged.
Fast Shipping
If you order the products that have the “Fast Shipping” logo until 12:00, they will be shipped on the same day. Shipments are not made on Saturday, Sunday, and public holidays.
Returns
If you return your purchased products in their unopened and original packaging, you can return them unconditionally within the first 14 days. This applies only to the Turkish market. International orders are non-refundable.
Campaign
  • Features
  • Payment Options
  • Comments (0)
  • FAQ
  • Document
  • Application
  • Safety Precautions
  • Videos
  • Suggestion Box
  • Information
  • General Features
    • Natural look
    • Deep penetrating dye
    • Applied by brush/cloth/dipping
    • Child safe (EN 71-3 Certified)
    • Ready to use
    Where to use
    • Suitable for all interior/ exterior wood except floors
    • Doors and window joinery
    • Shutters
    • Claddings
    • Fences
    • Pergolas
    • Balcony railings
    • Roof fringes
    • Interior wooden floorings
    • Panels
    • Wooden ceilings
    Packaging
    • 2,5 L.
    • 15 L.
    Exterior/Interior use
    Apply with brush, cloth, or dipping
    Stir well before use
    1 Lt-2 Katta 6-7 m2
    1 Lt covers 10-12 m2
    Do not crack or blister.


    Warning:
    The colors shown here are applied on oak and intended to approximate the final color. The color and the gloss obtained will vary according to the type, texture, and absorbency of the wood. Film thickness and the number of coats applied will also affect the result. To see the final color, it is recommended to apply the product on the wood to be used.

  • 0
  • •Coverage:

    • 1 L. covers 10-12 m² with one coat

    •Surface Preparation:

    • Remove any dirt, oil, and wood dust from the surface.

    -New Wood Surfaces:
    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
    -Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
    -Coated Wood Surfaces:
    • Do not apply the product on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with sandpaper.
    • Thoroughly clean the generated dust.

    •Application:

    • The product is ready to use and does not require thinning.
    • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
    • Apply the product in 1 coat by brush, cloth, or dipping and wait 4-6 hours for complete dry.
    • Apply in the direction of the wood grain to get a homogeneous look.
    • For interior use decorative finish, apply Prime Wood Floor (Parquet) Varnish or Prime MX 3030 as a topcoat.
    • For exterior use UV protection and decorative finish, apply Prime Aqua Industrial-Varnish SC7730 as a topcoat.

    •Maintenance (when the same product had been used before):

    • Do not apply the product on pre-coated surfaces.
    • Remove the old stain/varnish from the surface completely with sandpaper.
    • Thoroughly clean the generated dust.
    • Repeat the same process as described in "Application".
    • Inspect annually and maintain as required.

    •Instructions:

    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
    • The moisture content of the wood should max 20% for exterior use.
    • Do not apply the product under direct sunlight or rain.
    • Do not apply linseed oil, basecoat/primer, yacht varnish before or after Prime Decorative Wood Colorant (dye) applied surfaces.
    • To provide long-life protection against decay, apply Prime Wood Preserver on untreated softwoods and wait 24 hours before applying the product.
    • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
    • Painting tools should be cleaned with soap and plenty of warm water after application.
  • Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • There are many wood color products for interior and exterior wood coloring. Since wood is a natural material and must be protected well, the wood dye and colorants to be used should be selected well. So, what should we pay attention to when choosing wood coloring? Where can we use wood colorants? What are the wood coloring products that can be used in home areas or industrial areas? We have prepared a small article for you about these.

    As in every field, wood colorant products that are safe for human health and environmentally friendly do not contain heavy metals, and lead should be preferred. It must be a water-based wood colorant, conforming to the Toy Safety Standard. In this way, you can safely color many areas of your home, balcony railings, etc., while protecting your health and nature.

    Another essential point of the wood colorant is the rich color pigments in its content. It would help if you were careful that the product you will use contains high color pigments. In this way, you will maintain the natural appearance of your wood and provide good coloring. In addition, a translucent colorant brings out the wood texture and natural beauty of the wood.

    Where are water-based wood colorants used?

    You can use wood colorants on all interior / exterior wood such as door and window joinery, shutters, facade cladding, fences, pergolas, balcony railings, roof eaves, solid or laminated parquet floors, paneling, and wooden ceilings.

    How is Water-Based Wood Coloring applied?

    Hickson Decor Aqua DecorativeWood Colorants produced by Hemel are ready to use, do not require thinning, and can be applied by brush, cloth, and dipping methods.

    Tips for coloring wood

    When the wood colorant product is applied with a brush, it should be combed along the grain of the colorant wood on the surface with a brush to obtain a homogeneous appearance and avoid the risk of overlapping. In addition, to avoid any brush marks when applying wood colorant, after the product is applied, the excess should be wiped off with a cloth before allowing the color to dry. Therefore, the application should continue in small areas.

    Drinking water can be added at a 2 to 3% ratio to delay drying on large surfaces and sweltering weather and prevent possible brush traces.

    In exterior applications, the design of wooden details so that they do not accumulate on the surface where water will flow significantly increases its service life.

    Can I get different colors with wood colorant types?

    You can mix different colors of the same product to obtain different colors other than the standard colors of wood colorant, and you can prepare your custom color.

    Change the wood floor color with water-based wood colorants

    You can apply Hickson Decor Aqua Decorative Colorant's desired color by completely removing varnish on the surface and colorant, if any, with a scraper. You can complete the change by applying Hemel water-based wood floor varnishes on it. Click for wood floor coloring prices and wood floor varnishes!

  • Features
    General Features
    • Natural look
    • Deep penetrating dye
    • Applied by brush/cloth/dipping
    • Child safe (EN 71-3 Certified)
    • Ready to use
    Where to use
    • Suitable for all interior/ exterior wood except floors
    • Doors and window joinery
    • Shutters
    • Claddings
    • Fences
    • Pergolas
    • Balcony railings
    • Roof fringes
    • Interior wooden floorings
    • Panels
    • Wooden ceilings
    Packaging
    • 2,5 L.
    • 15 L.
    Exterior/Interior use
    Apply with brush, cloth, or dipping
    Stir well before use
    1 Lt-2 Katta 6-7 m2
    1 Lt covers 10-12 m2
    Do not crack or blister.


    Warning:
    The colors shown here are applied on oak and intended to approximate the final color. The color and the gloss obtained will vary according to the type, texture, and absorbency of the wood. Film thickness and the number of coats applied will also affect the result. To see the final color, it is recommended to apply the product on the wood to be used.

    Features
    Where to use
    :
    Wooden Door (Interior),Balcony Railings,Roof Eaves,Cladding (Exterior),Cladding (Interior),Fence,Joinery,Hobby,Door (Exterior),Wainscot,Table,Stairs,Furniture,Kitchen Countertop,Shutter,Parquet (Wood Floor),Window,Pergola,Chair,Coffee table,Siding
    Type
    :
    Water-based
    Finish
    :
    Semi-transparent
  • Payment Options
    General Features
    • Natural look
    • Deep penetrating dye
    • Applied by brush/cloth/dipping
    • Child safe (EN 71-3 Certified)
    • Ready to use
    Where to use
    • Suitable for all interior/ exterior wood except floors
    • Doors and window joinery
    • Shutters
    • Claddings
    • Fences
    • Pergolas
    • Balcony railings
    • Roof fringes
    • Interior wooden floorings
    • Panels
    • Wooden ceilings
    Packaging
    • 2,5 L.
    • 15 L.
    Exterior/Interior use
    Apply with brush, cloth, or dipping
    Stir well before use
    1 Lt-2 Katta 6-7 m2
    1 Lt covers 10-12 m2
    Do not crack or blister.


    Warning:
    The colors shown here are applied on oak and intended to approximate the final color. The color and the gloss obtained will vary according to the type, texture, and absorbency of the wood. Film thickness and the number of coats applied will also affect the result. To see the final color, it is recommended to apply the product on the wood to be used.

    Features
    Where to use
    :
    Wooden Door (Interior),Balcony Railings,Roof Eaves,Cladding (Exterior),Cladding (Interior),Fence,Joinery,Hobby,Door (Exterior),Wainscot,Table,Stairs,Furniture,Kitchen Countertop,Shutter,Parquet (Wood Floor),Window,Pergola,Chair,Coffee table,Siding
    Type
    :
    Water-based
    Finish
    :
    Semi-transparent
  • Yorumlar (0)
  • FAQ
  • Document
  • Application

    •Coverage:

    • 1 L. covers 10-12 m² with one coat

    •Surface Preparation:

    • Remove any dirt, oil, and wood dust from the surface.

    -New Wood Surfaces:
    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
    -Old Uncoated Wood Surfaces:
    • Sand the weathered surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.
    -Coated Wood Surfaces:
    • Do not apply the product on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with sandpaper.
    • Thoroughly clean the generated dust.

    •Application:

    • The product is ready to use and does not require thinning.
    • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
    • Apply the product in 1 coat by brush, cloth, or dipping and wait 4-6 hours for complete dry.
    • Apply in the direction of the wood grain to get a homogeneous look.
    • For interior use decorative finish, apply Prime Wood Floor (Parquet) Varnish or Prime MX 3030 as a topcoat.
    • For exterior use UV protection and decorative finish, apply Prime Aqua Industrial-Varnish SC7730 as a topcoat.

    •Maintenance (when the same product had been used before):

    • Do not apply the product on pre-coated surfaces.
    • Remove the old stain/varnish from the surface completely with sandpaper.
    • Thoroughly clean the generated dust.
    • Repeat the same process as described in "Application".
    • Inspect annually and maintain as required.

    •Instructions:

    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
    • The moisture content of the wood should max 20% for exterior use.
    • Do not apply the product under direct sunlight or rain.
    • Do not apply linseed oil, basecoat/primer, yacht varnish before or after Prime Decorative Wood Colorant (dye) applied surfaces.
    • To provide long-life protection against decay, apply Prime Wood Preserver on untreated softwoods and wait 24 hours before applying the product.
    • The product should be protected from freezing and stored at temperatures between 5°C to 35°C.
    • Painting tools should be cleaned with soap and plenty of warm water after application.
  • Safety Precautions

    Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • Videos
  • Öneri Kutusu
Prepared by  T-Soft E-Commerce.