sadsad x
asdasd

Prime Aqua Wood Stain - Walnut

Water-based translucent exterior wood stain
117.50 TL
Ücretsiz Kargo Free
Shipping
Hızlı Kargo Fast
Shipping
Select Color:

WALNUT

WALNUT
Select Packaging:

0,75

2,5

15

5 L. and over packaging options are available at stores
Select Quantity:
Installment Plan
Free Shipping
Fast Shipping
Returns
Installment Plan
If you are a Bonus, Maximum, or World Cardholder, you can complete your order with the advantage of 2, 3, or 6 installments without interest.
Free Shipping
Free shipping for orders above 20 EUR. For orders less than 20,00 EUR, a shipping fee of 6,00 EUR will be charged.
Fast Shipping
If you order the products that have the “Fast Shipping” logo until 12:00, they will be shipped on the same day. Shipments are not made on Saturday, Sunday, and public holidays.
Returns
If you return your purchased products in their unopened and original packaging, you can return them unconditionally within the first 14 days. This applies only to the Turkish market. International orders are non-refundable.
Campaign
  • Features
  • Payment Options
  • Comments (0)
  • FAQ
  • Document
  • Application
  • Safety Precautions
  • Videos
  • Suggestion Box
  • Information
  • General Features
    • Water repellent
    • Allows wood to breathe
    • Semi-transparent finish
    • Durable and resistant to exterior weather conditions
    • UV resistant
    • Child safe (EN 71-3 Certified)
    • Does not crack, peel or blister
    • Ready to use
    Where to use
    • Suitable for all exterior wood except floors
    • Doors and window joinery
    • Shutters
    • Claddings
    • Fences
    • Pergolas
    • Balcony railings
    • Roof fringes
    Packaging
    • 1 L.
    • 2,5 L.
    • 5 L.
    • 15 L. (Upon request)
    Dış Mekan İçindir
    Exterior
    Zeminde Uygulanmaz
    Not to be applied on decks/floors.
    Uv Dirençli
    Uv Resistant
    Fırça İle Uygulanır
    Apply with brush
    Önce Karıştırınız
    Stir well before use
    1 Lt-2 Katta 6-7 m2
    1 Lt covers 6-7 m2 in 2 coats
    Kabarma Yapmaz
    Does not crack or blister.


    Warning:
    The colors shown here are applied on pine and intended to approximate the final color. The color and the gloss obtained will vary according to the type, texture, and the absorbency of the wood. Film thickness and the number of coats applied will also affect the result. To see the final color, it is recommended to apply the product on the wood to be used.

  • 0
  • Coverage:

    • 1 L. covers 6-7 m² with two coats

    Surface Preparation:

    • Remove any dirt, oil, and wood dust from the surface.

    New Wood Surfaces:

    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.

    Old Uncoated Wood Surfaces:

    • Sand the weathered surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.

    Coated Wood Surfaces:

    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with sandpaper.
    • Thoroughly clean the generated dust.

    Application:

    • The product is ready to use and does not require thinning.
    • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
    • Apply the product in 2 coats by brush and wait 16 hours between coats.
    • Perform a slight sanding with sandpaper #180/220 between coats.
    • Wait 16 hours for complete dry.
    • Apply in the direction of the wood grain to get a homogeneous look.

    Maintenance (when the same product had been used before):

    • Do not apply the product directly on pre-coated surfaces.
    • Clean the wood surface completely from dirt and oil and perform a light sanding.
    • Thoroughly clean the generated dust.
    • Repeat the same process as described in "Application" with 1 or 2 coats depending on weathering.
    • Inspect annually and maintain as required.

    Instructions:

    • FOR EXTERIOR USE ONLY.
    • NOT SUITABLE FOR FLOORINGS.
    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
    • The moisture content of the wood should max 20%.
    • Do not apply the product under direct sunlight or rain.
    • Do not apply linseed oil, basecoat/primer, yacht varnish before or after product coated surfaces.
    • To provide long-life protection against decay, apply Prime Wood Presever on untreated softwoods and wait 24 hours before applying the product.
    • The product should be stored at temperatures between 5°C to 35°C.
    • Painting tools should be cleaned with soap and plenty of warm water after application.
  • Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • Ahşap Vernik Ne İşe Yarar ?

    Ahşap koruyucu vernik, ahşabın nemlenmesini, aşınmasını engelleyen ve dış etkenlere karşı dayanaklılığını arttıran koruyucu katman olarak kullanılan sıvı bir çözeltidir.
    Koruyucu katman görevi verniğin en bilindik özelliğidir. Ahşap üstüne koruyucu olarak sürülür. Ayrıca uzun süredir kullanılan ahşap yüzey ve eşyaların yeniymiş gibi görünmesini sağlar. Su itici ahşap vernikler ile ahşabın nemlenmesi önlenir. UV ışınlarına karşı da ahşabı korur.

    Ahşap Vernik Çeşitleri

    Ahşap vernikleri, su bazlı vernik ve solvent bazlı vernik olmak üzere ikiye ayrılırlar.

    Su Bazlı Ahşap Vernik ve Solvent Bazlı Ahşap Vernik Arasındaki Farklar
    Su bazlı ve solvent bazlı verniklerin hizmet ömrü aynıdır. Üretiminde kullanılan hammaddelerin kimyasal yapısından kaynaklı bazı farkları vardır.
    1. Su bazlı vernik kokusuzdur, ayrıca doğa dostudur. Solvent bazlı vernikte üretimde kullanılan tinerin kokusu vardır.
    2. Ahşap, su bazlı verniği daha fazla emdiği için su bazlı ahşap vernik doğal bir görünüm verir.
    3. Su bazlı ahşap vernik daha hızlı kurur.
    4. Su bazlı ahşap vernik içinde daha az VOC değeri bulunduğu için sağlık için daha güvenlidir.

    Ahşap Vernik Seçimi Nasıl Olmalıdır?
    İnsan ve çevre sağlığına duyarlı, doğa dostu, ağır metal ve kurşun içermeyen, oyuncak güvenliği sertifikası olan ahşap vernikler tercih edilmelidir.
    Verniğin nefes alan bir vernik olması da önemlidir, ahşabın ömrünü uzatır.
    Dış mekan, dış cephe ahşaplarda, güneş ışınlarına karşı güçlü bir koruma sağlayan bir ahşap vernik tercih etmeniz önemlidir.
    Ahşabın doğal dokusunu ve görüntüsünü korumasını istiyorsanız yarı şeffaf bir vernik kullanılmalıdır.
    Ahşap zeminlere uygulamak için kullanılacak ahşap verniğin kaymaz özellikli olması tercih edilmelidir.

    Nefes alan ahşap vernik/ahşap boyası nedir ve niçin önemlidir?
    Nefes alan boyalar ve vernikler, uygulanan yüzeyde suyu geçirmeyen fakat su buharını geçirebilen bir tabaka oluşturan ürünlerdir. Dış mekanda kullanılan ahşabın yağışlar ve havadaki rutubet değişmeleri nedeniyle çatlaması ya da ufak bir darbe alması sonucunda yüzeyde oluşabilecek ufak bir çatlak ahşabın ıslanmasına neden olabilir. Tabakanın altındaki ahşabı ıslatan bu suyun kısa sürede kuruması, boyanın ve ahşabın ömrü için çok önemlidir. Ahşabın uzun süre ıslak kalması hem boyanın dökülmesine hem de ahşabın çürümesine neden olur. Nefes alan vernik/boya bu durumu önler. Aynı zamanda ahşaba iyi nüfuz eder ve ahşapla birlikte çalışabilecek esnekliğe sahip olur.

    Ahşap Renkli Vernik Renkleri ve Fiyatları
    Ahşap vernikleme uygulamasında eğer ahşabın doğal dokusunun kaybolmaması isteniyor ise yarı şeffaf vernik kullanılması gerekir.
    Ahşap koruyucu renkli verniklerin birçok farklı renk seçenekleri bulunur. Hemel'in su ve solvent bazlı, dış cephe için ve zeminler için ürettiği zengin ahşap vernik renklerini, renk kartelasını görmek ve ahşap vernik fiyatlarını öğrenmek için tıklayın!

    Ahşap Vernik Uygulamasında Püf Noktalar
    Ahşap vernik uygulaması yapılırken, hem son görünümü iyileştirmek, hem de katların birbirine yapışması veya boyadan istenilen performansın alınabilmesi için katlar arası yoklama zımparası yapılmalıdır.
    İyi bir ahşap koruması için ahşabın kafa kısımlarına ürünü uygulamak önemlidir. Böylelikle, ahşabın en çok su alan kafa kısımlarına su iticilik özelliği kazandırılmış olur.
    Vernikleme yapacağınız ahşabın kenarlarının yuvarlatılmış olmasına dikkat edin. Keskin köşelerde vernik yeteri kadar tutunmaz ve film kalınlığı zayıf kalır. Bu keskin köşeden ahşabın su alma ihtimali ortaya çıkarak ürünün pullanıp dökülmesine neden olabilir.
    Dış cephe vernik uygulamalarında ahşap detayların suyun akacağı yüzeyde birikme yapmayacağı şekilde tasarlanması ürünün hizmet ömrünü önemli oranda arttırır.
    Tüm detaylar için tıklayın!
  • Features
    General Features
    • Water repellent
    • Allows wood to breathe
    • Semi-transparent finish
    • Durable and resistant to exterior weather conditions
    • UV resistant
    • Child safe (EN 71-3 Certified)
    • Does not crack, peel or blister
    • Ready to use
    Where to use
    • Suitable for all exterior wood except floors
    • Doors and window joinery
    • Shutters
    • Claddings
    • Fences
    • Pergolas
    • Balcony railings
    • Roof fringes
    Packaging
    • 1 L.
    • 2,5 L.
    • 5 L.
    • 15 L. (Upon request)
    Dış Mekan İçindir
    Exterior
    Zeminde Uygulanmaz
    Not to be applied on decks/floors.
    Uv Dirençli
    Uv Resistant
    Fırça İle Uygulanır
    Apply with brush
    Önce Karıştırınız
    Stir well before use
    1 Lt-2 Katta 6-7 m2
    1 Lt covers 6-7 m2 in 2 coats
    Kabarma Yapmaz
    Does not crack or blister.


    Warning:
    The colors shown here are applied on pine and intended to approximate the final color. The color and the gloss obtained will vary according to the type, texture, and the absorbency of the wood. Film thickness and the number of coats applied will also affect the result. To see the final color, it is recommended to apply the product on the wood to be used.

    Features
    Where to use
    :
    Roof Eaves,Cladding (Exterior),Siding,Joinery,Window,Shutter,Pergola,Door (Exterior),Balcony Railings,Fence
    Type
    :
    Water-based
    Finish
    :
    Semi-transparent
  • Payment Options
    General Features
    • Water repellent
    • Allows wood to breathe
    • Semi-transparent finish
    • Durable and resistant to exterior weather conditions
    • UV resistant
    • Child safe (EN 71-3 Certified)
    • Does not crack, peel or blister
    • Ready to use
    Where to use
    • Suitable for all exterior wood except floors
    • Doors and window joinery
    • Shutters
    • Claddings
    • Fences
    • Pergolas
    • Balcony railings
    • Roof fringes
    Packaging
    • 1 L.
    • 2,5 L.
    • 5 L.
    • 15 L. (Upon request)
    Dış Mekan İçindir
    Exterior
    Zeminde Uygulanmaz
    Not to be applied on decks/floors.
    Uv Dirençli
    Uv Resistant
    Fırça İle Uygulanır
    Apply with brush
    Önce Karıştırınız
    Stir well before use
    1 Lt-2 Katta 6-7 m2
    1 Lt covers 6-7 m2 in 2 coats
    Kabarma Yapmaz
    Does not crack or blister.


    Warning:
    The colors shown here are applied on pine and intended to approximate the final color. The color and the gloss obtained will vary according to the type, texture, and the absorbency of the wood. Film thickness and the number of coats applied will also affect the result. To see the final color, it is recommended to apply the product on the wood to be used.

    Features
    Where to use
    :
    Roof Eaves,Cladding (Exterior),Siding,Joinery,Window,Shutter,Pergola,Door (Exterior),Balcony Railings,Fence
    Type
    :
    Water-based
    Finish
    :
    Semi-transparent
  • Yorumlar (0)
  • FAQ
  • Document
  • Application
    Coverage:

    • 1 L. covers 6-7 m² with two coats

    Surface Preparation:

    • Remove any dirt, oil, and wood dust from the surface.

    New Wood Surfaces:

    • Sand the surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.

    Old Uncoated Wood Surfaces:

    • Sand the weathered surface with sandpaper #80/120.
    • Thoroughly clean the generated dust.

    Coated Wood Surfaces:

    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with sandpaper.
    • Thoroughly clean the generated dust.

    Application:

    • The product is ready to use and does not require thinning.
    • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
    • Apply the product in 2 coats by brush and wait 16 hours between coats.
    • Perform a slight sanding with sandpaper #180/220 between coats.
    • Wait 16 hours for complete dry.
    • Apply in the direction of the wood grain to get a homogeneous look.

    Maintenance (when the same product had been used before):

    • Do not apply the product directly on pre-coated surfaces.
    • Clean the wood surface completely from dirt and oil and perform a light sanding.
    • Thoroughly clean the generated dust.
    • Repeat the same process as described in "Application" with 1 or 2 coats depending on weathering.
    • Inspect annually and maintain as required.

    Instructions:

    • FOR EXTERIOR USE ONLY.
    • NOT SUITABLE FOR FLOORINGS.
    • Keep the product closed when not in use.
    • The general application temperature of the product is between 15°C to 25°C at a relative humidity range of 40-65%.
    • The moisture content of the wood should max 20%.
    • Do not apply the product under direct sunlight or rain.
    • Do not apply linseed oil, basecoat/primer, yacht varnish before or after product coated surfaces.
    • To provide long-life protection against decay, apply Prime Wood Presever on untreated softwoods and wait 24 hours before applying the product.
    • The product should be stored at temperatures between 5°C to 35°C.
    • Painting tools should be cleaned with soap and plenty of warm water after application.
  • Safety Precautions

    Safety Precautions:

    • USE WITH ADEQUATE VENTILATION.
    • KEEP OUT OF REACH OF CHILDREN.
    • Do not transfer contents to other containers for storage.
    • Do not use empty plastic cans for other purposes.
    • To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.
    • Avoid contact with eyes and skin.
    • Wash hands after using.
    • FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attention if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.
    • Dispose of contents/plastic cans in accordance with national regulations.
    • Please refer to the Safety Data Sheet (SDS) of the product for health and safety information.
  • Videos
  • Öneri Kutusu
Prepared by  T-Soft E-Commerce.